Digi M10 Technical overview and Dokumentacja Pobierz pdf (Strona 22)

Digi m10 Hardware Reference v 1.20

Page 22 of 36

Figure 9: Digi m10 Dimensions

3.3.2 Mounting

The Digi m10 can be mounted directly to the host PCB using a board-to-board connector. The

Digi m10 has five solder legs, which must be soldered to the host controller’s common ground

reference plane. The host controller’s PCB needs to have five mounting holes to accommodate

the Digi m10.

The ground reference planes for the Digi m10’s connector and solder legs should be the

same as they are connected together within Digi m10

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Brak uwag

Digi M10 Technical overview and Dokumentacja Strona 22