Digi AnywhereUSB Podręcznik Użytkownika Pobierz pdf (Strona 62)

AnywhereUSB/14

AnywhereUSB Remote I/O Concentrator User Guide 62

AnywhereUSB/14

Dimensions

Length: 4.97 in (12.62 cm)

Width: 17.00 in (43.18 cm)

Height: 1.74 in (4.42 cm)

Weight: 40.00 oz. (1134g)

Environmental

Operating temperature: 32

F to 131

F (0

C to 55

Relative humidity: 0% to 95% (non-condensing)

Power Requirements

The AnywhereUSB/14 uses single or dual 120/230VAC 50/60Hz power input(s) through the rear

IEC 60320 inlet(s). Redundant (dual) supply enables it to support mission critical applications

where uninterrupted powering is a must. In case of redundant (dual) powering, both supplies

provide power to the device about evenly proportioned. When one of the supplies crashes the

other will provide the complete power to the device. In case of single powering, use the left hand

side inlet (rear view). The maximum power requirement of the AnyhwereUSB/14 is 40W.

Hardware Interface Features

The unit provides 14 USB ports (standard A-type receptacles). The downstream ports support

Low Speed, Full Speed, and Hi Speed downstream devices.

The unit supports two Ethernet connectors (dual RJ-45) LAN1 & LAN2 for mission critical

applications (redundant Ethernet). The unit can switch from LAN1 to LAN2 and vice-versa if any of

them crashes. The primary input is LAN1.

The unit also provides an RS232 UART Management port via a DB9 connector at the rear next to

the network connectors.

Network Interface Features

Standards: IEEE 802.3, 802.3i (10Base-T), 802.3u (100Base-TX), 802.3x (full duplex and flow

control), HP Auto-MDIX (auto-detection of straight-through or crossover cabling)

Physical layer: 10/100 Mbps in half- or full-duplex mode, with auto-negotiation of speed and

duplex

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 68 69

Brak uwag

Digi AnywhereUSB Podręcznik Użytkownika Strona 62